MakerWorld
Hueforge & Lithophane
Go to Model
Morgan Wallen - I'm the Problem
88
Downloads
37
Likes
49
Makes
Morgan Wallen - Im the Problem For more fanart albums check out my profile → https://makerworld.com/en/@Noahs_A_Noobie/uploadPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.69mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments (IGNORE IF USING AMS)Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Brown At layer #15 (1.28mm) swap to Beige At layer #23 (1.92mm) swap to Jade White for the rest. Boost MePractice boosting models here!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
