moschettone Mobidick

Mobidick Carabiner features smooth, flowing curves and an organic outline that give it a subtle fantasy/elf look, with a clean integrated gate and no sharp edges for comfortable everyday handling. It is ideal as an EDC accessory for keys, zipper pulls, bags, lanyards or small tools, combining a lightweight design with a visually distinctive style that stands out from standard carabiners. The geometry is optimized to be easy to print and, depending on your slicer settings, can be printed without supports while keeping enough thickness for light daily use, but it is still a “convenience gadget” and not safety gear. Recommended material For this model, PETG is recommended over PLA because it offers better impact resistance, improved layer adhesion and higher heat resistance, which helps the carabiner flex slightly under load instead of snapping and better survive everyday knocks and warm environments (like inside a car). Print settings suggestion Material: PETG Layer height: 0.2 mm Perimeters: 3–4 Infill: 30–50% (grid or gyroid for improved toughness) Orientation: Lay flat on the build plate with the opening of the carabiner facing upwards, to maximize strength across the layers. Safety note text you can paste “This 3D printed carabiner is intended only for light-duty and decorative use (keys, zipper pulls, accessories). Do not use for climbing, safety-critical applications, or lifting people or heavy loads. Use at your own risk.”