Mosquito-like model rocket with support

Added some meshmixer support so I could slice with slic3r without filling up the inner cavity with support.

Update 1, 30-August-2016. Printed and the support worked great, did its job, but the fins printed poorly as they had no support and were very thin (so they moved around a little until they connected to the body tube). Also I hadn't noticed there was some support inside the nose cone. Version 2 will have support for the fins as well, including to either side of each fin, plus I beefed up the support inside the nose cone to add a little weight.

Update 2, 31 August-2016. Printed version 2 and the fins printed much better but the support was not very easy to cleanly remove, plus the nose cone is still pretty weird. Version 3 will be uploaded and have support structures farther from the fins, plus a solid nose cone so you can use an infill pattern from your slicer.

Update 3: Printed version 3, I'm pretty happy with it. One fin had a hard-to-remove support, but I don't think I