Mosquito

Project: komár.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Gray At layer #2 (0.72mm) swap to Black At layer #4 (1.12mm) swap to Beige At layer #6 (1.68mm) swap to Ivory White At layer #8 (0.72mm) swap to Gray At layer #9 (0.72mm) swap to Black At layer #10 (1.12mm) swap to Beige At layer #11 (0.72mm) swap to Gray At layer #12 (1.68mm) swap to Ivory White to finish