Mosquito Net Replacement Hook

🦟 Mosquito Net Replacement HookOptimized for Strength & Easy PrintingI designed this hook because the original ones that came with my new mosquito net were too fragile and snapped during installation. If you have a standard mosquito net with a 50mm plate and you're tired of flimsy plastic parts, this is the fix you need.🛠 Hardware NeededScrews: Designed for 3.5mm diameter countersunk wood screws (viti per legno a testa svasata diametro 3,5). The hole geometry is optimized to allow the screw head to sit flush with the surface.Why this design?Reinforced Geometry: Unlike the stock hooks, I’ve optimized the thickness to handle the tension of the net.Bambu Lab Ready: Tested on my Bambu P2S with excellent results.PETG Optimized: I highly recommend using PETG or PETG HF for its flexibility and weather resistance.Recommended Print Settings:Material: PETG (Better durability than PLA).Walls: 4 to 6 (This is where the strength comes from!).Top/Bottom Layers: 3 or 4 (around 0.6mm - 0.8mm tot