Mouflon - HueForge

by Garder3D · 2D Art

7 Downloads

7 Likes

3 Makes

Project: Muflón.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA i3D Tested Negro Transmission Distance: 0.6 PLA i3D Tested Gris oscuro Transmission Distance: 0.8 PLA Sakata 3D Gris claro Transmission Distance: 1.4 PLA i3D Tested Blanco Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #11 (0.96mm) swap to Light Gray At layer #17 (1.44mm) swap to White for the rest.