Thingiverse

Mount case for IR camera with lights

von Yoonpyo

90 Downloads

43 Likes

0 Makes

This camera case can be used with [Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2](https://www.thingiverse.com/thing:3114849) by [sneaks](https://www.thingiverse.com/sneaks/about). If you are interested in setting up a webcam on your 3D Printer, please go check it out. The design is very well thought out and worked wonderfully for me.

### Used Components:
- [IR Camera for Raspberry pi](https://www.aliexpress.com/item/32820804845.html?spm=a2g0s.9042311.0.0.3d9c4c4dSzs48l)
- [2020 Extrusion mount](https://www.thingiverse.com/thing:3114849/files) (2020_standard.STL) by [sneaks](https://www.thingiverse.com/sneaks/about)
- Two M2.5*10 screws
- Four screws provided with the camera (Approx dimensions _ d=1.95mm, dk=3.6mm, L=5mm, k=1.1mm)

### Assembly:
1. **Make sure you connect the ribbon cable to the camera module first.** It is very difficult to connect (or disconnect) ribbon cable once you put the camera and case together.
2. Pull the ribbon cable through the sl

camera mount infrared Octoprint pi infrared camera prusa Raspberry Pi raspberry pi camera security security camera webcam webcam holder webcam mount camera mount infrared Octoprint pi infrared camera prusa Raspberry Pi raspberry pi camera security security camera webcam webcam holder webcam mount

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat