Thingiverse
Mount for 2004 Smart Controller on Prusa i3
von BensHacks
36
Downloads
22
Likes
0
Makes
Giraffe type holder for 2004 Smart Controller on Prusa printers.
UPDATE:
- longer arm, prepared to take additional 5 or 10 cm of LED-strip.
- STL-files with and without support
- Lock ring
The panel is simply hooked to the tip of the left smooth rod of the z axis. Two hinges are making the mount very flexible.
On the left side is a keyed slot to the SD socked, witch makes it super easy to insert the SD card.
The reset/kill button is realized in X shape and it is slightly set back to prevent accidentally killing the print.
Underneath the frame is a grove for 15cm LED strip. It is connected by the red wire in the pictures to the "12V_AUX" socket on my RAMPS board. The Socket is located between the fuses and the X axis stepper driver. (To control brightness I used an step down converter.)
[See it in action!](https://youtu.be/3tegcItwCp8)
=> See also my other Prusa i3 reworks in [my Collection](http://www.thingiverse.com/7Steam/collections/my-prusa-i3-reworks)
=
UPDATE:
- longer arm, prepared to take additional 5 or 10 cm of LED-strip.
- STL-files with and without support
- Lock ring
The panel is simply hooked to the tip of the left smooth rod of the z axis. Two hinges are making the mount very flexible.
On the left side is a keyed slot to the SD socked, witch makes it super easy to insert the SD card.
The reset/kill button is realized in X shape and it is slightly set back to prevent accidentally killing the print.
Underneath the frame is a grove for 15cm LED strip. It is connected by the red wire in the pictures to the "12V_AUX" socket on my RAMPS board. The Socket is located between the fuses and the X axis stepper driver. (To control brightness I used an step down converter.)
[See it in action!](https://youtu.be/3tegcItwCp8)
=> See also my other Prusa i3 reworks in [my Collection](http://www.thingiverse.com/7Steam/collections/my-prusa-i3-reworks)
=
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!