Mount for E3D V6, Blower, and BLTouch

This is a simple mount for an E3D V6 hot end with a blower on the left side and BLTouch on the right. It includes a blower duct and shim for the BLTouch. It is designed to use a brass insert (M3 5mmx5mm) to attach the blower to the mount. The X,Y,Z offsets for this mount are, respectively: 39, 4, -2.3.

NOTE: The current iteration has the tip of the BLTouch probe offset about 40mm from the tip of the extruder. If this proves to be an issue in testing I'll modify the design to move it a bit closer.

EDIT (10/23/2017): Uploaded a new version of the back and front pieces to adjust the position of the hotend a bit so that it lines up better with the filament coming out of the MK8/MK9 extruder.

EDIT (11/07/2017): I added files for a second version (back/front/shim_v2) that puts the probe a little closer to the nozzle. By using a slight negative X endstop position (-14mm on my setup) and a 10mm UBL margin it's now able to completely probe the bed automatically. The X,Y,Z offsets for