Thingiverse
Mount for Marvelmind Super-Beacon
von matthijsbos
1
Downloads
1
Likes
0
Makes
Mount for Marvelmind Super-Beacon.
The beacon is inserted into the top and slides into the base. The top is best printed upside-down.
One base is for mounting on a pole using zip-ties.
The other base has cavities for 4 5x10mm cylinder magnets. Insert a pause during printing to insert the magnets.
Onshape document: https://cad.onshape.com/documents/1ab3f3cc0c44cbb62c76666a/w/98ff5c7a756341e70d67f5e7/e/644c31171dc5ccc012687bef?renderMode=0&uiState=63932b7626df352c20049045
The beacon is inserted into the top and slides into the base. The top is best printed upside-down.
One base is for mounting on a pole using zip-ties.
The other base has cavities for 4 5x10mm cylinder magnets. Insert a pause during printing to insert the magnets.
Onshape document: https://cad.onshape.com/documents/1ab3f3cc0c44cbb62c76666a/w/98ff5c7a756341e70d67f5e7/e/644c31171dc5ccc012687bef?renderMode=0&uiState=63932b7626df352c20049045
matthijsbos veröffentlicht auch auf
69 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
