mount - stereoMicroscopeAirFilter 001

- Dual 80mm fan smoke extractor and filter

- Designed to fit around the vertical post on a stereo microscope
https://www.aliexpress.com/item/3-5X-7X-45X-90X-Simul-Focal-Soldering-IC-repair-Trinocular-stereo-microscope-With-big-boom/32911809554.html
- Also uses activated carbon filters
https://www.aliexpress.com/item/2pcs-lot-Activated-Carbon-Filter-Sponge-for-Hakko-493-Solder-Smoke-Absorber-ESD-Fume-Extractor-13cm/32712020268.html

- Requires:
4to8* M4x25mm hex head bolts
4to9* M4 square nuts
4* M3x30mm whatever head bolts
4* M3 square nuts
2* 2sheets of 130x130x10mm activated charcoal foam filters (both cut into quarters)
2* 80nn fans
- You actually need longer M4's for an 8015 than you do for an 8025, because on 9025 an M4x16mm will fit between the two faces of the fan and you can get away with just bolting through the inner face and not all the way through the entire fan.
- Depending on how close to your smoke source the inlet is a 8015 is too weak for use with