Thingiverse
Mouth Shield
by BenBeBoy
5
Downloads
7
Likes
0
Makes
Here is a mouth version of the face shield, aka mouth shield.
Light 3D printed mask.
- 3D Print the base model.
Use support depending on your printer. There is a example picture.
- Print & cut the Acrylic Sheet pattern according to the drawing (PDF or DXF).
Pay attention to the scale.
- Place the sheet on the base and make sure the pins goes in the holes.
To lock it in place, melt the pins with a solering iron or a hot piece of metal.
- Use standard mask strip tied together. (Or any kind of strip)
Light 3D printed mask.
- 3D Print the base model.
Use support depending on your printer. There is a example picture.
- Print & cut the Acrylic Sheet pattern according to the drawing (PDF or DXF).
Pay attention to the scale.
- Place the sheet on the base and make sure the pins goes in the holes.
To lock it in place, melt the pins with a solering iron or a hot piece of metal.
- Use standard mask strip tied together. (Or any kind of strip)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
