MP Delta Pro / Atom 3 Filament Roller

Filament Roller for the Monoprice Delta Pro built by Atom 3d. This is also referenced as the Atom 3 lite, but the frame is identical from what I've seen, and thus this roller should work. The attached screw should work for 48mm ish to 70+mm filament rolls, depending on the depth. The .f3d file is attached if you'd like to play with the taper angle of the extrusion. It should auto calculate if you keep it reasonable. If you do make updates parts be sure to post the remix as others(and myself) may find it useful!

I'd also love to see your makes, so upload those as well!

BOM
=====
| Item | Quantity |
| ---------- | ---------- |
| M5 x 30mm* | 1 |
| M5 Washer | 2 |
| M3 x 6mm* | 3 |
| 625 Bearing | 2 |
| 2.5mm zip tie | 2 |

*Button head cap screws are suggested

Print & Assembly Instructions
=====

Print one of each 3d model attached. I printed all at .2, I believe the wire channel could probably be pointed at .1 for better overhangs. All stl's are in the correct