MPCNC 525 RIGID SUPPORT

This is a piece put together that will add rigidity to your cnc mill. Specifically made for the MPCNC meant to confine the forces put on the assembly itself. One side is fitted with a diameter of 23.5mm (3/4" emt conduit) and the other is a diameter of 29.5mm (1" emt conduit) which is for the emt conduit that can be found at Menards or most other hardware stores. The only place i could find 3/4" emt conduit near me was at Farm and Fleet which was significantly farther away compared to the Menards. The main purpose of this part is to utilize hardware that's even more local.

The only other hardware you'll need are
-x8 6-32x3/4" Tapered Head Machine Screws

You can probably get away with using less machine screws, I used 6 because I like to minimize my use of them.

This also makes it possible to add more functionality to the cnc be that a camera for recording or vacuum mounts or even a mounting structure for an enclosure.

I would print these at 55-60% infill in PLA, and it