Thingiverse
MPCNC 52mm Spindle Mount
por itnaanti
134
Descargas
70
Likes
0
Makes
[Update 1/2019: There is a new version added by request with a 56mm inner diameter. The original is a 52mm inner diameter. I have not test-printed the 56mm version, so if you print it, please leave a comment about if it works or not.]
This tool mount is designed for a spindle with a 52mm diameter body, such as the Inventables 300w Quiet Cut spindle, or a Chinese 300w DC spindle from AliExpress. The inside diameter is 52mm (no tolerance), so it is necessary to gently spread the rings to fit in the spindle.
Other mounts made me nervous how thin they are, so I over-built this one to hopefully outlast the spindle, with a thicker clamping ring, and four screws holding each ring to the tool mount. Unfortunately, this means it needs to be printed with supports.
Print two of them, oriented horizontally the way it is oriented in the STL file, and use supports. Do not stand it on end to print it. That would put the layer lines in critical areas where clamping pressure is greatest, and
This tool mount is designed for a spindle with a 52mm diameter body, such as the Inventables 300w Quiet Cut spindle, or a Chinese 300w DC spindle from AliExpress. The inside diameter is 52mm (no tolerance), so it is necessary to gently spread the rings to fit in the spindle.
Other mounts made me nervous how thin they are, so I over-built this one to hopefully outlast the spindle, with a thicker clamping ring, and four screws holding each ring to the tool mount. Unfortunately, this means it needs to be printed with supports.
Print two of them, oriented horizontally the way it is oriented in the STL file, and use supports. Do not stand it on end to print it. That would put the layer lines in critical areas where clamping pressure is greatest, and
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
