MPCNC WD_Platform_Mod Version 2

Flower Relief Vid https://youtu.be/iH5e_Hmh3Yo

Update: Added skp file.

https://youtu.be/sV9Fkbcss_U
https://www.youtube.com/watch?v=wVbgnNDuzdI&feature=youtu.be

Step 1: Load up the platform dwg in your favorite cam software and cut out. I have also included the gcode I used as an alternative to creating your own gcode. Watch the speed!

Step 2: Print the test part and check for tolerances, should be snug not loose. If the print comes out too loose, try using a thin shim such as the aluminum from a coke can, or modify the included skp file.

Step 3: If satisfied with the test fit then print the following.
WD_RemixPlatformV2_ZAxisTopMount - 1x
WD_RemixPlatformV2_ZAxisBottomMount - 1x

Step 4: Print following parts from the first remix. (exact same)
WD_RemixPlatform_ZBearing - 5x (3 for top, 2 for bottom)
WD_RemixPlatform_XRod - 2x
WD_RemixPlatform_YRod - 1x

Step 5: Add bearings to all parts. (note: a couple of times I had to loosen or remove a bolt in order to