Thingiverse
MPLAB Xpress Development Board case
door lu9aga
0
Downloads
0
Likes
0
Makes
This is a protective case for the Microchip MPLA Xpress development board (the general purpose version - Part Number: DM164140). The cover protects the programming auxiliary circuit, but leaves the application development area uncovered: you will have access to the potentiometer, push button, leds, etc.
The status led (running/programming) can be seen as well in spite of the cover, and the master reset button can also be acted upon with the aid of the button cap.
In order to better visualize the status led, insert a short length of translucent crystal PLA filament (1.7mm) and it will work as a very efficient light conduit.
If you want you can also print one or two washers to fix the upper side of the board. I just use one washer. I added a 2 pin polarized connector to my board to power it when usb pwr is not available, and the cover also contemplates this add-on. As I am providing the skp source files you can modify this design to better suit your layout.
MLABxpress_01.skp is the g
The status led (running/programming) can be seen as well in spite of the cover, and the master reset button can also be acted upon with the aid of the button cap.
In order to better visualize the status led, insert a short length of translucent crystal PLA filament (1.7mm) and it will work as a very efficient light conduit.
If you want you can also print one or two washers to fix the upper side of the board. I just use one washer. I added a 2 pin polarized connector to my board to power it when usb pwr is not available, and the cover also contemplates this add-on. As I am providing the skp source files you can modify this design to better suit your layout.
MLABxpress_01.skp is the g
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!