MPSM Light Stick Mount/Mod

Tired of not being able to see what you're printing on your Monoprice Select Mini(MPSM)? Well no more! I designed this simple USB light stick holder that mounts on the 2 rear screws on top of the tower(see pictures). No wiring needed. All you need is the printed part, the LED light stick(linked below), and a m3 machine screw and nut(if you want the light stick to be fixed). I printed this in both PLA and PETG. If you're using PLA, I'd recommend 40% infill. If you're using PETG, I recommend 60% infill as PETG is a little flexible. It takes roughly 40 minutes to print this.

Assembly: Insert the light stick(on/off switch first) into the clamp hole(see pictures). Insert m3 machine screw into holes above the clamp and thread on nut. Snug up the screw/nut. Remove the 2 rear screws on top of the z axis tower on your printer. Line up the holes on the light stick holder and the tower. Insert the 2 screws you just removed and tighten. Plug it in and you're good to go!

I've also included t