Mr. Satan

DragonBall Mr.Satan Print at 100% infill with a layer height of 0.04mm with a base layer of 0.27mm The Model is 104.65x140.91mm in sizeYou may print at higher layer heights below the Min Depth of 0.28mmThe Max Depth is 1.6mm and the Actual Depth is 1.5mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Sunlu Purple Transmission Distance: 6 PLA Sunlu Meta White Transmission Distance: 8Swap Instructions: Start with Black At layer #11 (0.67mm) swap to Purple At layer #18 (0.95mm) swap to White for the rest.