MRC THUNDER KING WHEELS - Two versions

Here is my full set of replacement wheels for the 1990's MRC Thunder King RC Truck.. They come in two types; solid like the original and one with holes. These wheels are 3.2" Diameter and 2.3" Wide. They will fit the original tires as well as Traxxas Tmaxx tires, among others. There is both a FRONT (Round Bearings) and a REAR (Hex 12mm) version for each type.

These parts are designed with tolerances for PETG. You may have success with PLA but I Have not tested the parts for PLA.

See My Thunder King Parts Set for more info.

-

I have included the .3MF files. Each wheel has thick top and bottom layers as well as perimeters, I do not suggest changing this as its intended for strength and proper size for through holes.

The post cleanup of so many supports looks much worse than it is, I cleaned all four in about 20 min with a flat head screwdriver and some pliers. Just be careful not to brace your pry tool against the inside rim edge and crack it.

Don't forget to glue the rears!