Thingiverse
MTB GoPro Fork Mount
by PrintIt2024
1
Downloads
3
Likes
0
Makes
Easy to print in one go!
Created it for a Marzocchi Bomber Z2.
The inner diameter is 4cm, but with the screw it schould be possible to mount on smaller Forks.
The only support you need is a paint on for the hole which hold the counternut at the GoPro attachment.
Used 15% infill so its a little flexible to get around the fork. You can secure it with the screw.
Need much and strong infill on the screw otherwise it will twist off!
Material used is PLA. Will let u know how well it lasts.
P,S, this is my first design so be gentle :)
Have fun!
P.S. If you like my work and wanna support me please https://buymeacoffee.com/printit2024
Created it for a Marzocchi Bomber Z2.
The inner diameter is 4cm, but with the screw it schould be possible to mount on smaller Forks.
The only support you need is a paint on for the hole which hold the counternut at the GoPro attachment.
Used 15% infill so its a little flexible to get around the fork. You can secure it with the screw.
Need much and strong infill on the screw otherwise it will twist off!
Material used is PLA. Will let u know how well it lasts.
P,S, this is my first design so be gentle :)
Have fun!
P.S. If you like my work and wanna support me please https://buymeacoffee.com/printit2024
PrintIt2024 also publishes on
4 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
