Thingiverse
MTC2 Steering Rack
door BobW99
5
Downloads
2
Likes
0
Makes
Temporary replacement for the Mugen MTC2 steering rack if you break one. Do not use the steering limiter bushing or the body support post. If you do you will likely break other parts. Use a good servo saver like XRay.
This part has a small lip on the bottom to stop the bearing from pulling through. This lip raises the rack .5mm so you may need to adjust your bump steer shims to compensate. You will also need to insert at least .7mm between the crank arms and the bearing due to the lip.
This part has a small lip on the bottom to stop the bearing from pulling through. This lip raises the rack .5mm so you may need to adjust your bump steer shims to compensate. You will also need to insert at least .7mm between the crank arms and the bearing due to the lip.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
