Mud Kitchen Cooker Dials and Electric Ring

I have chosen to make the Mud Kitchen using three Cooker Dials and three Cooker Rings, very much depends on the size of Kitchen you are planning.
The wooden Kitchen was made from recycled wood.

Cooker Ring:-
1 x Cooker Ring Body
1 x Cooker Inner Ring
The Inner Ring is held in place by applying Clear Silicone Sealant to the base of the spiral ring of the body and is then pressed in place. Any excess silicone is immediately wiped away.
The completed assembly is held in place on the kitchen top using a M5 countersunk screw and nut.

Cooker Dials.
The Cooker Dial are numbered 1-6 on the front face, and when assembled rotates only one way, in this case Clockwise using a Gear Pawl Ratchet.

The Gear Pawl is attached to the front of the Kitchen using 3off, 3.5 x 16mm Counter sunk screws.
The Pawl is a tight fit over the Bearing Rod Shaft, note the direction of the arms of the Pawl.
The Knob Dial is offered up over the Bearing Rod Shaft, and making sure that the Dial rotates fr