Multiboard Cereal / Filament Box Holder

This model is a multiboard compatible holder designed for cereal boxes, which are commonly used for filament storage. It can also be mounted directly to a wall or cabinet. It was made for these and similar boxes, whose lids measure 112mm wide: https://a.co/d/5Bgn8ra There is also a “wide” profile for boxes, whose lids measure approximately 118mm. It was designed from the ground up, but was inspired by these two designs:https://makerworld.com/en/models/742504https://makerworld.com/en/models/485945 For multiboard mounting, it was designed to be secured by 3 x 20mm T-Slot Small flat head bolts In addition to better fitting the cereal boxes linked above, it has several improvements over the other designs:Long arms and an anti-slip tab at the rear of the holder to keep the boxes secure even if heavily loadedClearance holes for the mounting bolts to allow for the use of a standard 15mm socket or adapterOptimized for multiboard mountingAn optional (but recommended) 27mm standoff is included.