MultiBoard Extended height Spray Can Storage

This is an adaptation of my Cylinder holder with a Multiboard Moderate Weight Bearing Snap remix, but I have added an additional snap to stop heavier cylinders starting to lean away from the board. It has a medium duty weight beaaring snap at the top and a normal snap 25mm below. For the customisation I have removed the height adjustment, and you can only vary the diameter. It plugs directly into the multiboard hex, and I have used normal supports under the snap in the print profile. For smaller diameters I recommend adding at least 0.5mm to the object measured. For larger diameters I recommend adding 1mm for clearance.I print with 3 wall loops at 0.2mm layer heightI recommend enabling supports and selecting "normal(auto)"