Multiboard Universal Build Plate Holder

I wanted a build plate holder that could handle multiple plates, and mount on multiboard without feeling like it would pull off if I pulled out a plate badly.Features of this holder:Five slots, 1.2mm deep. Will hold even my thickest build plate.Two pieces, place them at whatever width you need. The slots are 40mm wide on each side, so plenty of support if your width is not “perfect” on a 25mm increment.Two pieces are much easier to print, will fit easily on small printers like the Prusa Mini or Bambu Mini.Each slot is staggered by 5mm vertically, making it easier to see and pull the plate you want.Mounts using four Large multiboard bolts, two on each side of the holder. A 9mm bolt should be sufficient, but I use 13mm because I'm paranoid. The holder is rock-solid on the multiboard.Note: You will need to print four Large Multiboard Bolts 9mm or 13mm, these are not included in the print files. They can be found at https://www.multiboard.io/parts-library/threads