Multicolor golden gradient portrait printable without AMS

无ams也能打印多色金渐层肖像我家猫叫“土豆”，这是以他为原型创作的金渐层肖像画，希望大家喜欢。（颜色只要是黑橙黄白就行，不一定用官方耗材，颜色差别不大）使用0.4或者0.2都可以打印，0.2的会更加精细以 100% 填充率打印，首层0.16mm，其它层0.08mm模型尺寸为 200x200mm您可以在低于最小深度 0.48mm 的更高层高下打印最大深度为 2.2mm，实际深度为 2.2mm 交换说明：从白色开始在第 6 层 (0.56 毫米) 交换为黄色在第 12 层 (1.04 毫米) 交换为橙色在第 21 层 (1.76 毫米) 将其余部分交换为黑色。 Project: 土豆.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6This print uses 4 unique filamentsSwap Instructions: Start with Jade White At layer #6 (0.56mm) swap to Yellow At layer #12 (1.04mm) swap to Orange At layer #21 (1.76mm) swap to Black for the rest.