Thingiverse

Multifunctional Arm (Phone holder) – Bild 1

Multifunctional Arm (Phone holder) – Bild 2

Multifunctional Arm (Phone holder) – Bild 3

Multifunctional Arm (Phone holder) – Bild 4

Multifunctional Arm (Phone holder)

von jll8

1k Downloads

3.5k Likes

8 Makes

Zum Modell

🆕 17.08.2025 A stronger clamp has been added to the Basic set.
🆕 28.02.2025 new parts ⬇
Multifunctional arm for attaching mobile phone and other objects.
All parts can be rotated by 22.5°.
####Arm
The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm. Each arm has a connection with a hole on one side and a threaded connection on the other. The threads and screws need to be loosened.
####Screws
Print screws with 3 perimeters for strength. It is necessary to turn the threads several times to make them turn smoothly.
####Corners
Use the left or right corner to finish the arm and attach the mobile phone holder.
Print on the side with the supports in the holes.
####Base
The base has three parts: Base, Base Arm Corner and Screw.
Base Arm Corner print on the side with the supports in the holes.
####Clamp
The base can be attached with a clamp. The clamp has three parts: Clamp, Clamp screw and Clamp contact.
The maximum mounting thickness is 50 mm.
The bolt on the clamp is M14 and th

arm clamp FiberonFunctionalDesign holder mobile mobile phone mobile phone holder mobile phone stand multifunction multifunctional phone Phone Stand smartphone holder stand arm clamp FiberonFunctionalDesign holder mobile mobile phone mobile phone holder mobile phone stand multifunction multifunctional phone Phone Stand smartphone holder stand arm clamp FiberonFunctionalDesign holder mobile mobile phone mobile phone holder mobile phone stand multifunction multifunctional phone Phone Stand smartphone holder stand

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat