Multifunctional magnet stocker

CapsThe two caps serve as dispensers for the north and south poles.Push one or two magnets into the cap to give it magnetism.If the magnets tend to come off easily, use adhesive.The cap may be stiff immediately after printing.Try opening and closing the lid several times.Main unitThere is an opening so you can see how much magnet is left.The slide bar makes it easy to push out the magnet.The main unit is hexagonal, so when using multiple units, it prevents the magnets from rolling around due to repulsion between each other.Size variationsAvailable in diameters 2mm / 3mm / 4mm / 5mm / 6mm / 8mm / 10mm.Thickness is not stated, but storage and dispensing are possible.About printingThe size is displayed on the back, so please look at the viewer from the back to check the size.The long stick is printed sideways, so there are fewer printing errors.Now supports AMS/monotone.It is arranged so that it can also be printed with the A1mini. Please be careful as the Prime Tower will collide.I'm