Multimeter probe, High voltage probe

This is a 3d printed multimeter probe. I did it to do a high voltage probe 1/100.

If I read 1volt it means 100v

I used 2x 100Meg Ohm 1% in series with a 2.4Meg 5% and I added a 33k to have exactly 2.4746Mohm

100M 8000 volts digikey PN: HVA12FA100MCT-ND‎
2.4M,33k regular 1/4watt is fine

Metal tip from ebay see photo. Just search for multimeter probe needle

https://www.instructables.com/High-Voltage-Probes/?commentId=CDJPFC4LEJZ307J&reply=true

100% infill, No support needed except for the tip.