Mx5 oil catchcan

I created this catchcan because I was unable to find a catchcan i was looking for anywhere. 2 ports in 14mm (no restriction), 1 big port out (no restriction) and 1 drain port at the bottom. Print and install guide, also see pictures for clarification:1 print all in ASA (minimum), 100% infill2 Spray all parts with spray paint till the ASA does not soak up any paint anymore, this way its ensure to be water tight. (also inside the catchcan)3 Optional: Put some steel wool type material in the bottom of the exit compartment for optimal oil to air separation.4 Attach the lid to the housing using some small screws and some gasket maker at the top of the walls.5 attach the fittings, (note the smaller fittings are weak, i used steel fittings instead. m16x14 for the 2 bigger ones at the top, and m16x9mm for the drain at the bottom.) I attached the drain hose to a ball style valve to make draining easy.6 The lid has a recess for a 10mm (socket size) nut which can be used to attach the catchcan to