Mystical Cat Bookmark 2

This bookmark is part of this set of 3You can find the other two bookmarks at this links:Segnalibro 1[coming soon]Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 46.7x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Orange At layer #14 (1.2mm) swap to Red At layer #18 (1.52mm) swap to Blue Gray At layer #20 (1.68mm) swap to Lemon Yellow At layer #23 (1.92mm) swap to White for the rest. NOTA: Questa stampa richiede più di 4 colori. Potete trovare una guida