Thingiverse
N Scale Flex Track Guides
por TrainBox
3
Descargas
4
Likes
0
Makes
These are track guides for laying flex track.
Radii from 7.5"/191mm-9.5"/241mm
Curve segments are 25deg, segmented at 10deg/15deg.
Width is 4.45mm and slips right between Atlas and Kato rails... and given that's the gauge, it should work for any N Scale/Gauge track.
The straight section can just be scaled to whatever length you need, but is at 5"/127mm
The 7.5-8.5" radii may be problematic for some locos. 4 axle locos will likely manage just fine. BLI SW7 and Bachmann GP40 can handle these. The BLI cries closer to 7" (Bachmann not tested).
Radii from 7.5"/191mm-9.5"/241mm
Curve segments are 25deg, segmented at 10deg/15deg.
Width is 4.45mm and slips right between Atlas and Kato rails... and given that's the gauge, it should work for any N Scale/Gauge track.
The straight section can just be scaled to whatever length you need, but is at 5"/127mm
The 7.5-8.5" radii may be problematic for some locos. 4 axle locos will likely manage just fine. BLI SW7 and Bachmann GP40 can handle these. The BLI cries closer to 7" (Bachmann not tested).
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
