Nagi - Blue Lock - Glow

Nagi - Glow in the dark - hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.4mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Bambu Lab Glow Blau Leuchtend Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #14 (1.2mm) swap to Blau Leuchtend At layer #22 (1.84mm) swap to Beige At layer #24 (2mm) swap to Jade White for the rest.