NANAX

bubblehead series
what can I say, with that mouth cap I imagine the cyber men meets pig.
printing wise has an .22 layers height with a wall thickness of 1.2 in cura , " about 3 perimeters in slicer " with only a 5% infill " may get away with no infill, not tried it yet".
fitting a little tight so hand file will be needed " be sure to have all parts before sanding/filing there be no gluing back on.

updates:
added a tilt bracket and plug the jx mini bracket just aint up to the job.

tilt & pan is the jx mini http://www.thingiverse.com/thing:1013303.


BEWARE: need to desolder the cans from which ever US "PING" you use.there's impressions in the inner wall for LDR" see the four holes", and four spaces for thumb tacks to be used with a picaxe "used touch sense. throw out the cans, their's enough room inside to hotglue a PIcam and laser in place.

the bubblehead series is meant to be bit of fun cad time for me so everything is in a state of evolving.