Nano Talon VTOL Conversion Kit

Nano Talon VTOL Conversion Kit
==========================

Introduction
--------------

This is a very simple kit to convert the ZOHD Nano Talon (with PNP motor) into a VTOL (quadplane), using only very few additional components.

Feel free to ask any questions! :)

Flight Video
----------------

https://www.youtube.com/watch?v=U5osCcxKE_A


Installation Instructions
---------------------------

Print four motor mounts and two boom mounts.
Install the carbon fiber tube into the boom mounts, tighten them in with M3 screws & nuts.
Install the motors on the motor mounts, then glue the mounts onto the carbon tube (make sure that the front/back motors have the same distance from CG). Also make sure both motors are perfectly straight/pointing in the same direction.

Then glue the boom mounts to the underside of the wings (see pictures for approximate position) - you can still adjust the booms by loosening the screws.
I recommend installing the ESCs in the lower hatch,