MakerWorld
Hueforge & Lithophane
Voir le modèle
Naruto - Itachi Hueforge
13
Téléchargements
12
Likes
3
Makes
Would love to see your prints!Every boost helps me create more hueforges and give back to the community! :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x88.62mm in size You may print at higher layer heights below the Min Depth of 1.3mmThe Max Depth is 3mm and the Actual Depth is 2.4mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 4 unique filaments Swap Instructions: Start with Black At layer #21 (1.76mm) swap to Red At layer #25 (2.08mm) swap to Dark Brown At layer #26 (2.16mm) swap to Beige for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
