Naruto: Kakashi Hueforge

Naruto: Kakashi Hueforge! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size (you can scale down the size, but make sure to keep the same Z height!)You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic White Transmission Distance: 5PLA Silk Purple Transmission Distance: 4.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GrayAt layer #11 (0.96mm) swap to Jade WhiteAt layer #18 (1.52mm) swap to BlackAt layer #19 (1.6mm) swap to PurpleAt layer #26 (2.16mm) swap to White for the rest.