Naruto rasengan - Hueforge

Hueforge of Naruto rasengan The photos shows the result in 200*150mm and a nozzle of 0.4 The penultimate image shows the result with soft light just behind. The last image shows the result with a backlight just behind. You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge description Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.86x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.08mm Filaments Used: #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #00000