Naruto Sage Mode Hueforge

“I never go back on my word, that's my nindo: my ninja way!” Project: Naruto Sage Mode.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 156x234mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.64mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 5.2 #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Cyan At layer #8 (0.72mm) swap to Jade White At layer #9 (0.8mm) swap to Black At layer #10 (0.88mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Yellow At layer #13 (1.12mm) sw