Naruto team 2 hueforge

Hueforge of naruto team in NarutoThe photos shows the result in 200*150mm and a nozzle of 0.4You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.02x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Marron Red Transmission Distance: 1.3PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Matte Latte Brown Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Blue GrayAt layer #7 (0.64mm) swap to BlueAt layer #9 (0.8mm) swap to Marron RedAt layer #11 (0.96mm) swap to YellowAt layer #17 (1.44mm) swap to BlueAt layer #19 (1.6mm) swap to Latte BrownAt layer #22 (1.84mm) swap to Jade White for the rest.