Thingiverse
Ne Pas Toucher !
door garloo
11
Downloads
7
Likes
0
Makes
This 260x200 panel has a plain surface, the three colors are printed in the same layer.
To do this you need to print the three STLs on the same board in this order:
1 - Centre_Orange with a layer thickness of 0.15
2 - Texte_Blanc (white text) with a layer thickness of 0.15
3 - Fond_Noir (black background) with a first layer thickness of 0.30
Remove the centering angles before moving on to the next color.
The glossy aspect of the panel is obtained by printing on glass plate.
To do this you need to print the three STLs on the same board in this order:
1 - Centre_Orange with a layer thickness of 0.15
2 - Texte_Blanc (white text) with a layer thickness of 0.15
3 - Fond_Noir (black background) with a first layer thickness of 0.30
Remove the centering angles before moving on to the next color.
The glossy aspect of the panel is obtained by printing on glass plate.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!