Thingiverse
Necklace Display
por hrhprincessjewel
103
Descargas
93
Likes
0
Makes
Original file was hollow and think. I did several prints and there was a lot of holes. I really liked the look of the mock up.
Layer Height: 01.75mm
Wall thickness: 3.0mm
Wall Line Count: 9
Top/Bottom Thickness: 0.72mm
Top Layers: 5
Bottom Layers: 5
Infill Density 22%
Infill Pattern: Grid
Printing Temp: 200
Printing speed: 50.0 mm/s
Mesh Fixes: Remove all holes
Does have a grid interior. On the "Normal" Setting. Took roughly 3 hours to print. Since I am using this in my actual Jewelry store the time didn't matter to me. Only the final look.
The Neck is also long enough to add a ring.
Layer Height: 01.75mm
Wall thickness: 3.0mm
Wall Line Count: 9
Top/Bottom Thickness: 0.72mm
Top Layers: 5
Bottom Layers: 5
Infill Density 22%
Infill Pattern: Grid
Printing Temp: 200
Printing speed: 50.0 mm/s
Mesh Fixes: Remove all holes
Does have a grid interior. On the "Normal" Setting. Took roughly 3 hours to print. Since I am using this in my actual Jewelry store the time didn't matter to me. Only the final look.
The Neck is also long enough to add a ring.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
