Neon Heart

Okay here is an explanation how to build this.You have 2 files, header and base, both are printed without support.Other materials that you will need:70cm of Gen 1.0 Neon Strip in any collor you like0.08mm or 0.1mm enameled copper wire (around 10cm of it) you can use regular wire instead but be carefull to not create short circuit12V 1-2A power adapter from any old equipment you got lying aroundFirst cut Neon strip in 2 pieces, as I did on picture. Be careful to cut it precisely and on designated spots on neon strip itself (marked with little black line) otherwise strip won't work. Connect two pieces at the top using enameled copper wire and soldering iron (if you don't have enameled copper wire, regular wire can do the job, but it will make slight gap and the neon strip won't look uniform), or you can strip regular wire and then solder but be careful not to make short circuit. When you soldered 2 pieces on the top of heart start inserting Neon strip in header. There will be