Neopixel ring ESP notification light case

This is a mount for an LED that holds an Adafruit 12-neopixel ring, and below that an ESP32-S3-Mini development board that I found on Aliexpress (which is one of the smallest ESP development boards I could find with an integrated 2.4ghz wifi antenna.

Neopixel Ring: https://www.adafruit.com/product/1643

ESP32-S3-Zero: https://www.aliexpress.us/item/3256806676382106.html?spm=a2g0o.order_list.order_list_main.5.237b1802YaDfrb&gatewayAdapt=glo2usa (you have to select the S3 and not the C3, the dimensions are different).

Print the base and the dome separately (I recommend using a support for the dome). The ESP32 board should be mounted upside down with the USB-C port facing the cutout. The ring can be placed above the board. There's enough space to solder the three 5VDC, Ground and Data wires from the LED ring to the ESP board. The neopixel ring can be powered directly from the ESP32's 5V pin.

I used white PLA for a smooth, diffuse gradient. Clear/translucent filament will be muc