Nereus Face Plate

Print:
==================
Case: Printed with Brim and Supports with Case front UP
Sides: Supports are not required and usually print bottom down


There are 3 different Modular Designs:
===================


Stock TFT
=================
Requires 2 sides and the TFT Case. The Left Side with USB/SD Recommended for this setup

Hardware:
4x m3*8 screws/nut and m4 screws with T-Nuts on side

TFT 3.2
=================
3.2 TFT works as expected with tight compression fit. Requires Left/Right
Hardware:

4x m3*8 screws/nut and m4 screws with T-Nuts on side

5" OctoPI TFT
=================
This Design does has its own setup and different sides due to the 5" screen.
Requires 4 files:
Nereus_5PI_Right.stl
Nereus_5PI_Left.stl
Nereus_5_PI.stl
Nereus 5 PI Support.stl

Designed to use Screen:
https://www.amazon.com/gp/product/B072813CS7

I also recommend a right angle adapter for your power such as
https://www.amazon.com/gp/product/B0886BJJVV

Hardware:
4x m