Nerf Apollo Pump Grip

This is a pump grip for the nerf Apollo,.,,, 8 years late.

Its almost a drop-in build, The only shell cutting required is to the priming handle for the priming u bar and for fixing the bar arms if you wish to add the stock.

The non moving parts are a very snug fit and may require sanding, i didn't experiment with loser fits.

Depending on the wall thickness/inner diameter of the PVC plastics pipe, you may have to dremel out about 14cms down into the PVC plastic to allow enough room for the blasters priming mechanism movement.

For the build, you will need the following -
Aluminum bars 15x2mm, 20x2mm & U profile bar 20x10x2mm.
M3 & M4 screws & nuts.
M3 threaded rod for cutting to size.
PVC Plastic pipe 1" / 33.4mm OD, wall thickness 3.3mm or less.
Dremel
Saw
Drill
sand paper.

I didn't include the barrel tip because i didn't design it, its off the magnus shotgun build. When I design one I will add it.

Its been a while since I've posted a design so please let me know if you have any