Thingiverse
Nerf crossbolt pump action kit
di Zero-Blade
17
Download
8
Likes
0
Makes
Make your nerf crossbolt pump action!
This kit only fits if you've already removed the bow arms.
The slide part slides over the tac rail and is held in place with 2 small screws (I drilled 2 tiny holes in the blaster for these)
Slide the pumpgrip on and in the forward position, connect it to the crossbolt slide (the light grey bit on top) with some bolts and nuts and two strips of metal (I used L shaped aluminium of 15x15x1,5mm but that's pretty overkill, it's what I had lying around)
The hex holes in the grip fit an m4 nut nicely.
Happy blasting!
This kit only fits if you've already removed the bow arms.
The slide part slides over the tac rail and is held in place with 2 small screws (I drilled 2 tiny holes in the blaster for these)
Slide the pumpgrip on and in the forward position, connect it to the crossbolt slide (the light grey bit on top) with some bolts and nuts and two strips of metal (I used L shaped aluminium of 15x15x1,5mm but that's pretty overkill, it's what I had lying around)
The hex holes in the grip fit an m4 nut nicely.
Happy blasting!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
