Nerf Type - Blaster Dart Tip - Vented Tin Denter

Redesigned tip version of previous model for Worker Gen 3 foam darts. Tip is more pointy and I've added vents to the shaft to hopefully expand the foam at the front of the dart as it gets rammed through the barrel.(Tip can be gently sanded to remove the slight ridge left by brim) The included profile should give you a 1.18g tip, play around with the infill to vary the weight. With foam, the darts are coming out at around 1.3g once glued in. Apply a ring of glue below the holes and a thin layer half way down the shaft. Shoe glue does the trick, but allow plenty of drying time before use. Total length in short dart foam should be 40mm, so they will fit in most short dart mags. These make a very pleasing sound when impacting tin cans.