Nextion 3.5 Case

This is a minimal, tight enclosure for a 3.5" Nextion touch display and an ESP32 DevKit board.

The clearances are tight...I'd say perfect! Enough space to use the standard 4-pin plug at the top of the Nextion and tuck an ESP32 (or 8266) devkit board underneath. There are alignment pins, support rail, and micro-usb cut-out for the ESP32 in the base.

The Nextion display can either float or be screwed down with some short M3 screws. The cover snaps in place. Display is centered on the front face.

Overall, I'm pleased with it. Could use some sort of pop-out kick-stand to tilt the display, but think I'll do that as a separate item.s